Total
1220 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2017-4952 | 1 Vmware | 1 Xenon | 2019-10-03 | 5.0 MEDIUM | 7.5 HIGH |
| VMware Xenon 1.x, prior to 1.5.4-CR7_1, 1.5.7_7, 1.5.4-CR6_2, 1.3.7-CR1_2, 1.1.0-CR0-3, 1.1.0-CR3_1,1.4.2-CR4_1, and 1.5.4_8, contains an authentication bypass vulnerability due to insufficient access controls for utility endpoints. Successful exploitation of this issue may result in information disclosure. | |||||
| CVE-2017-1000125 | 1 Codiad | 1 Codiad | 2019-10-03 | 5.0 MEDIUM | 7.5 HIGH |
| Codiad(full version) is vulnerable to write anything to configure file in the installation resulting upload a webshell. | |||||
| CVE-2018-11194 | 1 Quest | 1 Disk Backup | 2019-10-03 | 9.0 HIGH | 8.8 HIGH |
| Quest DR Series Disk Backup software version before 4.0.3.1 allows privilege escalation (issue 6 of 6). | |||||
| CVE-2018-12259 | 1 Apollotechnologiesinc | 2 Momentum Axel 720p, Momentum Axel 720p Firmware | 2019-10-03 | 7.2 HIGH | 6.8 MEDIUM |
| An issue was discovered on Momentum Axel 720P 5.1.8 devices. Root access can be obtained via UART pins without any restrictions, which leads to full system compromise. | |||||
| CVE-2018-10204 | 1 Purevpn | 1 Purevpn | 2019-10-03 | 9.0 HIGH | 8.8 HIGH |
| PureVPN 6.0.1 for Windows suffers from a SYSTEM privilege escalation vulnerability in its "sevpnclient" service. When configured to use the OpenVPN protocol, the "sevpnclient" service executes "openvpn.exe" using the OpenVPN config file located at %PROGRAMDATA%\purevpn\config\config.ovpn. This file allows "Write" permissions to users in the "Everyone" group. An authenticated attacker may modify this file to specify a dynamic library plugin that should run for every new VPN connection attempt. This plugin will execute code in the context of the SYSTEM account. | |||||
| CVE-2018-19072 | 2 Foscam, Opticam | 6 C2, C2 Application Firmware, C2 System Firmware and 3 more | 2019-10-03 | 3.6 LOW | 5.5 MEDIUM |
| An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. /mnt/mtd/app has 0777 permissions, allowing local users to replace an archive file (within that directory) to control what is extracted to RAM at boot time. | |||||
| CVE-2018-20621 | 1 Microvirt | 1 Memu | 2019-10-03 | 7.2 HIGH | 7.8 HIGH |
| An issue was discovered in Microvirt MEmu 6.0.6. The MemuService.exe service binary is vulnerable to local privilege escalation through binary planting due to insecure permissions set at install time. This allows code to be run as NT AUTHORITY/SYSTEM. | |||||
| CVE-2017-7199 | 1 Tenable | 1 Nessus | 2019-10-03 | 7.2 HIGH | 7.8 HIGH |
| Nessus 6.6.2 - 6.10.3 contains a flaw related to insecure permissions that may allow a local attacker to escalate privileges when the software is running in Agent Mode. Version 6.10.4 fixes this issue. | |||||
| CVE-2018-15502 | 1 Lwolf | 1 Loading Docs | 2019-10-03 | 5.0 MEDIUM | 7.5 HIGH |
| Insecure permissions in Lone Wolf Technologies loadingDOCS 2018-08-13 allow remote attackers to download any confidential files via https requests for predictable URLs. | |||||
| CVE-2017-0317 | 2 Microsoft, Nvidia | 2 Windows, Gpu Driver | 2019-10-03 | 6.9 MEDIUM | 7.5 HIGH |
| All versions of NVIDIA GPU and GeForce Experience installer contain a vulnerability where it fails to set proper permissions on the package extraction path thus allowing a non-privileged user to tamper with the extracted files, potentially leading to escalation of privileges via code execution. | |||||
| CVE-2018-2490 | 1 Sap | 1 Fiori Client | 2019-10-03 | 6.8 MEDIUM | 7.8 HIGH |
| The broadcast messages received by SAP Fiori Client are not protected by permissions. SAP Fiori Client version 1.11.5 in Google Play store addresses these issues and users must update to that version. | |||||
| CVE-2017-15877 | 1 Sistemagpweb | 1 Gpweb | 2019-10-03 | 5.0 MEDIUM | 9.8 CRITICAL |
| Insecure Permissions vulnerability in db.php file in GPWeb 8.4.61 allows remote attackers to view the password and user database. | |||||
| CVE-2018-7169 | 1 Shadow Project | 1 Shadow | 2019-10-03 | 5.0 MEDIUM | 5.3 MEDIUM |
| An issue was discovered in shadow 4.5. newgidmap (in shadow-utils) is setuid and allows an unprivileged user to be placed in a user namespace where setgroups(2) is permitted. This allows an attacker to remove themselves from a supplementary group, which may allow access to certain filesystem paths if the administrator has used "group blacklisting" (e.g., chmod g-rwx) to restrict access to paths. This flaw effectively reverts a security feature in the kernel (in particular, the /proc/self/setgroups knob) to prevent this sort of privilege escalation. | |||||
| CVE-2018-1203 | 1 Dell | 1 Emc Isilon Onefs | 2019-10-03 | 7.2 HIGH | 6.7 MEDIUM |
| In Dell EMC Isilon OneFS, the compadmin is able to run tcpdump binary with root privileges. In versions between 8.1.0.0 - 8.1.0.1, 8.0.1.0 - 8.0.1.2, and 8.0.0.0 - 8.0.0.6, the tcpdump binary, being run with sudo, may potentially be used by compadmin to execute arbitrary code with root privileges. | |||||
| CVE-2017-6338 | 1 Trendmicro | 1 Interscan Web Security Virtual Appliance | 2019-10-03 | 4.0 MEDIUM | 6.5 MEDIUM |
| Multiple Access Control issues in Trend Micro InterScan Web Security Virtual Appliance (IWSVA) 6.5 before CP 1746 allow an authenticated, remote user with low privileges like 'Reports Only' or 'Auditor' to change FTP Access Control Settings, create or modify reports, or upload an HTTPS Decryption Certificate and Private Key. | |||||
| CVE-2018-6593 | 1 Malwarefox | 1 Antimalware | 2019-10-03 | 4.6 MEDIUM | 7.8 HIGH |
| An issue was discovered in MalwareFox AntiMalware 2.74.0.150. Improper access control in zam32.sys and zam64.sys allows a non-privileged process to register itself with the driver by connecting to the filter communication port and then using IOCTL 0x8000204C to \\.\ZemanaAntiMalware to elevate privileges. | |||||
| CVE-2018-6269 | 1 Nvidia | 1 Jetson Tx2 | 2019-10-03 | 4.6 MEDIUM | 7.8 HIGH |
| NVIDIA Jetson TX2 contains a vulnerability in the kernel driver where input/output control (IOCTL) handling for user mode requests could create a non-trusted pointer dereference, which may lead to information disclosure, denial of service, escalation of privileges, or code execution. The updates apply to all versions prior to R28.3. | |||||
| CVE-2018-14934 | 1 Polycom | 2 Trio 8500, Trio 8500 Firmware | 2019-10-03 | 3.3 LOW | 6.5 MEDIUM |
| The Bluetooth subsystem on Polycom Trio devices with software before 5.5.4 has Incorrect Access Control. An attacker can connect without authentication and subsequently record audio from the device microphone. | |||||
| CVE-2017-6928 | 2 Debian, Drupal | 2 Debian Linux, Drupal | 2019-10-03 | 3.5 LOW | 5.3 MEDIUM |
| Drupal core 7.x versions before 7.57 when using Drupal's private file system, Drupal will check to make sure a user has access to a file before allowing the user to view or download it. This check fails under certain conditions in which one module is trying to grant access to the file and another is trying to deny it, leading to an access bypass vulnerability. This vulnerability is mitigated by the fact that it only occurs for unusual site configurations. | |||||
| CVE-2018-12615 | 1 Phusion | 1 Passenger | 2019-10-03 | 5.0 MEDIUM | 5.3 MEDIUM |
| An issue was discovered in switchGroup() in agent/ExecHelper/ExecHelperMain.cpp in Phusion Passenger before 5.3.2. The set of groups (gidset) is not set correctly, leaving it up to randomness (i.e., uninitialized memory) which supplementary groups are actually being set while lowering privileges. | |||||