Total
579 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2021-29482 | 1 Xz Project | 1 Xz | 2021-05-14 | 5.0 MEDIUM | 7.5 HIGH |
| xz is a compression and decompression library focusing on the xz format completely written in Go. The function readUvarint used to read the xz container format may not terminate a loop provide malicous input. The problem has been fixed in release v0.5.8. As a workaround users can limit the size of the compressed file input to a reasonable size for their use case. The standard library had recently the same issue and got the CVE-2020-16845 allocated. | |||||
| CVE-2021-0273 | 1 Juniper | 9 Acx5800, Ex9200, Junos and 6 more | 2021-05-04 | 5.0 MEDIUM | 5.3 MEDIUM |
| An always-incorrect control flow implementation in the implicit filter terms of Juniper Networks Junos OS and Junos OS Evolved on ACX5800, EX9200 Series, MX10000 Series, MX240, MX480, MX960 devices with affected Trio line cards allows an attacker to exploit an interdependency in the PFE UCODE microcode of the Trio chipset with various line cards to cause packets destined to the devices interfaces to cause a Denial of Service (DoS) condition by looping the packet with an unreachable exit condition ('Infinite Loop'). To break this loop once it begins one side of the affected LT interfaces will need to be disabled. Once disabled, the condition will clear and the disabled LT interface can be reenabled. Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. This issue only affects LT-LT interfaces. Any other interfaces are not affected by this issue. This issue affects the following cards: MPCE Type 3 3D MPC4E 3D 32XGE MPC4E 3D 2CGE+8XGE EX9200 32x10G SFP EX9200-2C-8XS FPC Type 5-3D FPC Type 5-LSR EX9200 4x40G QSFP An Indicator of Compromise (IoC) can be seen by examining the traffic of the LT-LT interfaces for excessive traffic using the following command: monitor interface traffic Before loop impact: Interface: lt-2/0/0, Enabled, Link is Up Encapsulation: Logical-tunnel, Speed: 100000mbps Traffic statistics: Current delta Input bytes: 3759900268942 (1456 bps) [0] <---------- LT interface utilization is low Output bytes: 3759900344309 (1456 bps) [0] <---------- LT interface utilization is low After loop impact: Interface: lt-2/0/0, Enabled, Link is Up Encapsulation: Logical-tunnel, Speed: 100000mbps Traffic statistics: Current delta Input bytes: 3765160313129 (2158268368 bps) [5260044187] <---------- LT interface utilization is very high Output bytes: 3765160399522 (2158266440 bps) [5260055213] <---------- LT interface utilization is very high This issue affects: Juniper Networks Junos OS on ACX5800, EX9200 Series, MX10000 Series, MX240, MX480, MX960. Versions 15.1F6, 16.1R1, and later versions prior to 16.1R7-S8; 17.1 versions prior to 17.1R2-S12; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S10, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R1-S7, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3-S2; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S4, 19.2R2; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S1, 19.4R2. This issue does not affect the MX10001. This issue does not affect Juniper Networks Junos OS versions prior to 15.1F6, 16.1R1. Juniper Networks Junos OS Evolved on ACX5800, EX9200 Series, MX10000 Series, MX240, MX480, MX960 19.4 versions prior to 19.4R2-EVO. This issue does not affect the MX10001. | |||||
| CVE-2017-16944 | 2 Debian, Exim | 2 Debian Linux, Exim | 2021-05-04 | 5.0 MEDIUM | 7.5 HIGH |
| The receive_msg function in receive.c in the SMTP daemon in Exim 4.88 and 4.89 allows remote attackers to cause a denial of service (infinite loop and stack exhaustion) via vectors involving BDAT commands and an improper check for a '.' character signifying the end of the content, related to the bdat_getc function. | |||||
| CVE-2018-20467 | 4 Canonical, Debian, Imagemagick and 1 more | 4 Ubuntu Linux, Debian Linux, Imagemagick and 1 more | 2021-04-28 | 4.3 MEDIUM | 6.5 MEDIUM |
| In coders/bmp.c in ImageMagick before 7.0.8-16, an input file can result in an infinite loop and hang, with high CPU and memory consumption. Remote attackers could leverage this vulnerability to cause a denial of service via a crafted file. | |||||
| CVE-2018-10912 | 1 Redhat | 2 Keycloak, Single Sign-on | 2021-04-22 | 4.0 MEDIUM | 4.9 MEDIUM |
| keycloak before version 4.0.0.final is vulnerable to a infinite loop in session replacement. A Keycloak cluster with multiple nodes could mishandle an expired session replacement and lead to an infinite loop. A malicious authenticated user could use this flaw to achieve Denial of Service on the server. | |||||
| CVE-2021-22197 | 1 Gitlab | 1 Gitlab | 2021-04-07 | 4.0 MEDIUM | 4.3 MEDIUM |
| An issue has been discovered in GitLab CE/EE affecting all versions starting from 10.6 where an infinite loop exist when an authenticated user with specific rights access a MR having source and target branch pointing to each other | |||||
| CVE-2021-28667 | 2 Python, Stackstorm | 2 Python, Stackstorm | 2021-03-25 | 7.1 HIGH | 7.5 HIGH |
| StackStorm before 3.4.1, in some situations, has an infinite loop that consumes all available memory and disk space. This can occur if Python 3.x is used, the locale is not utf-8, and there is an attempt to log Unicode data (from an action or rule name). | |||||
| CVE-2020-11186 | 1 Qualcomm | 226 Csrb31024, Csrb31024 Firmware, Pm3003a and 223 more | 2021-03-23 | 2.1 LOW | 5.5 MEDIUM |
| Modem will enter into busy mode in an infinite loop while parsing histogram dimension due to improper validation of input received in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Mobile | |||||
| CVE-2021-25673 | 1 Siemens | 1 Simatic S7-plcsim | 2021-03-18 | 4.9 MEDIUM | 5.5 MEDIUM |
| A vulnerability has been identified in SIMATIC S7-PLCSIM V5.4 (All versions). An attacker with local access to the system could cause a Denial-of-Service condition in the application when it is used to open a specially crafted file. As a consequence, the application could enter an infinite loop, become unresponsive and must be restarted to restore the service. | |||||
| CVE-2020-9307 | 1 Belden | 1 Hirschmann Hios | 2021-02-23 | 6.1 MEDIUM | 6.5 MEDIUM |
| Hirschmann OS2, RSP, and RSPE devices before HiOS 08.3.00 allow a denial of service. An unauthenticated, adjacent attacker can cause an infinite loop on one of the HSR ring ports of the device. This effectively breaks the redundancy of the HSR ring. If the attacker can perform the same attack on a second device, the ring is broken into two parts (thus disrupting communication between devices in the different parts). | |||||
| CVE-2020-24944 | 1 Privateoctopus | 1 Picoquic | 2021-02-10 | 5.0 MEDIUM | 7.5 HIGH |
| picoquic (before 3rd of July 2020) allows attackers to cause a denial of service (infinite loop) via a crafted QUIC frame, related to the picoquic_decode_frames and picoquic_decode_stream_frame functions and epoch==3. | |||||
| CVE-2021-0221 | 1 Juniper | 1 Junos | 2021-02-05 | 2.9 LOW | 6.5 MEDIUM |
| In an EVPN/VXLAN scenario, if an IRB interface with a virtual gateway address (VGA) is configured on a PE, a traffic loop may occur upon receipt of specific IP multicast traffic. The traffic loop will cause interface traffic to increase abnormally, ultimately leading to a Denial of Service (DoS) in packet processing. The following command could be used to monitor the interface traffic: user@junos> monitor interface traffic Interface Link Input packets (pps) Output packets (pps) et-0/0/1 Up 6492089274364 (70994959) 6492089235319 (70994956) et-0/0/25 Up 343458103 (1) 156844 (0) ae0 Up 9132519197257 (70994959) 9132519139454 (70994956) This issue affects Juniper Networks Junos OS on QFX Series: all versions prior to 17.3R3-S10; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S5, 18.4R3-S5; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S3; 19.2 versions prior to 19.2R1-S5, 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R1-S2, 20.2R2. | |||||
| CVE-2020-28095 | 1 Tenda | 2 Ac1200, Ac1200 Firmware | 2021-01-05 | 7.8 HIGH | 7.5 HIGH |
| On Tenda AC1200 (Model AC6) 15.03.06.51_multi devices, a large HTTP POST request sent to the change password API will trigger the router to crash and enter an infinite boot loop. | |||||
| CVE-2017-14058 | 1 Ffmpeg | 1 Ffmpeg | 2020-12-29 | 4.3 MEDIUM | 6.5 MEDIUM |
| In FFmpeg 2.4 and 3.3.3, the read_data function in libavformat/hls.c does not restrict reload attempts for an insufficient list, which allows remote attackers to cause a denial of service (infinite loop). | |||||
| CVE-2020-13986 | 1 Contiki-os | 1 Contiki | 2020-12-16 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered in Contiki through 3.0. An infinite loop exists in the uIP TCP/IP stack component when handling RPL extension headers of IPv6 network packets in rpl_remove_header in net/rpl/rpl-ext-header.c. | |||||
| CVE-2020-24337 | 1 Altran | 2 Picotcp, Picotcp-ng | 2020-12-14 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered in picoTCP and picoTCP-NG through 1.7.0. When an unsupported TCP option with zero length is provided in an incoming TCP packet, it is possible to cause a Denial-of-Service by achieving an infinite loop in the code that parses TCP options, aka tcp_parse_options() in pico_tcp.c. | |||||
| CVE-2020-13984 | 1 Contiki-os | 1 Contiki | 2020-12-14 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered in Contiki through 3.0. An infinite loop exists in the uIP TCP/IP stack component when processing IPv6 extension headers in ext_hdr_options_process in net/ipv6/uip6.c. | |||||
| CVE-2020-16127 | 1 Freedesktop | 1 Accountsservice | 2020-11-24 | 2.1 LOW | 5.5 MEDIUM |
| An Ubuntu-specific modification to AccountsService in versions before 0.6.55-0ubuntu13.2, among other earlier versions, would perform unbounded read operations on user-controlled ~/.pam_environment files, allowing an infinite loop if /dev/zero is symlinked to this location. | |||||
| CVE-2020-27152 | 1 Linux | 1 Linux Kernel | 2020-11-16 | 2.1 LOW | 5.5 MEDIUM |
| An issue was discovered in ioapic_lazy_update_eoi in arch/x86/kvm/ioapic.c in the Linux kernel before 5.9.2. It has an infinite loop related to improper interaction between a resampler and edge triggering, aka CID-77377064c3a9. | |||||
| CVE-2018-5813 | 2 Canonical, Libraw | 2 Ubuntu Linux, Libraw | 2020-11-10 | 7.1 HIGH | 6.5 MEDIUM |
| An error within the "parse_minolta()" function (dcraw/dcraw.c) in LibRaw versions prior to 0.18.11 can be exploited to trigger an infinite loop via a specially crafted file. | |||||