Filtered by vendor Netapp
Subscribe
Total
2289 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2019-5493 | 1 Netapp | 1 Data Ontap | 2020-08-24 | 4.3 MEDIUM | 7.5 HIGH |
| Data ONTAP operating in 7-Mode versions prior to 8.2.5P3 are susceptible to a vulnerability which discloses information to an unauthenticated attacker. A successful attack requires that multiple non-default options be enabled. | |||||
| CVE-2019-17274 | 1 Netapp | 6 All Flash Fabric-attached Storage A400, All Flash Fabric-attached Storage A400 Firmware, Fabric-attached Storage 8300 and 3 more | 2020-08-24 | 7.2 HIGH | 7.8 HIGH |
| NetApp FAS 8300/8700 and AFF A400 Baseboard Management Controller (BMC) firmware versions 13.x prior to 13.1P1 were shipped with a default account enabled that could allow unauthorized arbitrary command execution via local access. | |||||
| CVE-2019-5507 | 1 Netapp | 1 Snapmanager | 2020-08-24 | 2.1 LOW | 5.5 MEDIUM |
| SnapManager for Oracle prior to version 3.4.2P1 are susceptible to a vulnerability which when successfully exploited could lead to disclosure of sensitive information. | |||||
| CVE-2019-5496 | 1 Netapp | 1 Oncommand Insight | 2020-08-24 | 5.0 MEDIUM | 7.5 HIGH |
| Oncommand Insight versions prior to 7.3.5 shipped without certain HTTP Security headers configured which could allow an attacker to obtain sensitive information via unspecified vectors. | |||||
| CVE-2019-5491 | 1 Netapp | 1 Clustered Data Ontap | 2020-08-24 | 5.0 MEDIUM | 7.5 HIGH |
| Clustered Data ONTAP versions prior to 9.1P15 and 9.3 prior to 9.3P7 are susceptible to a vulnerability which discloses sensitive information to an unauthenticated user. | |||||
| CVE-2019-6260 | 2 Aspeedtech, Netapp | 5 Ast2400, Ast2400 Firmware, Ast2500 and 2 more | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| The ASPEED ast2400 and ast2500 Baseband Management Controller (BMC) hardware and firmware implement Advanced High-performance Bus (AHB) bridges, which allow arbitrary read and write access to the BMC's physical address space from the host (or from the network in unusual cases where the BMC console uart is attached to a serial concentrator). This CVE applies to the specific cases of iLPC2AHB bridge Pt I, iLPC2AHB bridge Pt II, PCIe VGA P2A bridge, DMA from/to arbitrary BMC memory via X-DMA, UART-based SoC Debug interface, LPC2AHB bridge, PCIe BMC P2A bridge, and Watchdog setup. | |||||
| CVE-2019-5490 | 1 Netapp | 2 Clustered Data Ontap, Service Processor | 2020-08-24 | 10.0 HIGH | 9.8 CRITICAL |
| Certain versions between 2.x to 5.x (refer to advisory) of the NetApp Service Processor firmware were shipped with a default account enabled that could allow unauthorized arbitrary command execution. Any platform listed in the advisory Impact section may be affected and should be upgraded to a fixed version of Service Processor firmware IMMEDIATELY. | |||||
| CVE-2018-12015 | 6 Apple, Archive\, Canonical and 3 more | 9 Mac Os X, \, Ubuntu Linux and 6 more | 2020-08-24 | 6.4 MEDIUM | 7.5 HIGH |
| In Perl through 5.26.2, the Archive::Tar module allows remote attackers to bypass a directory-traversal protection mechanism, and overwrite arbitrary files, via an archive file containing a symlink and a regular file with the same name. | |||||
| CVE-2019-5489 | 2 Linux, Netapp | 3 Linux Kernel, Active Iq Performance Analytics Services, Element Software Management Node | 2020-08-24 | 2.1 LOW | 5.5 MEDIUM |
| The mincore() implementation in mm/mincore.c in the Linux kernel through 4.19.13 allowed local attackers to observe page cache access patterns of other processes on the same system, potentially allowing sniffing of secret information. (Fixing this affects the output of the fincore program.) Limited remote exploitation may be possible, as demonstrated by latency differences in accessing public files from an Apache HTTP Server. | |||||
| CVE-2016-9131 | 4 Debian, Isc, Netapp and 1 more | 12 Debian Linux, Bind, Data Ontap Edge and 9 more | 2020-08-19 | 5.0 MEDIUM | 7.5 HIGH |
| named in ISC BIND 9.x before 9.9.9-P5, 9.10.x before 9.10.4-P5, and 9.11.x before 9.11.0-P2 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a malformed response to an RTYPE ANY query. | |||||
| CVE-2019-2977 | 3 Debian, Netapp, Oracle | 10 Debian Linux, Active Iq Unified Manager, E-series Santricity Os Controller and 7 more | 2020-08-18 | 5.8 MEDIUM | 4.8 MEDIUM |
| Vulnerability in the Java SE product of Oracle Java SE (component: Hotspot). Supported versions that are affected are Java SE: 11.0.4 and 13. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Java SE accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of Java SE. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets (in Java SE 8), that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.0 Base Score 4.8 (Confidentiality and Availability impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:L). | |||||
| CVE-2019-2987 | 4 Debian, Netapp, Oracle and 1 more | 12 Debian Linux, E-series Santricity Os Controller, E-series Santricity Storage Manager and 9 more | 2020-08-18 | 4.3 MEDIUM | 3.7 LOW |
| Vulnerability in the Java SE product of Oracle Java SE (component: 2D). Supported versions that are affected are Java SE: 11.0.4 and 13. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Java SE. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets (in Java SE 8), that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability can also be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. CVSS 3.0 Base Score 3.7 (Availability impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L). | |||||
| CVE-2016-8864 | 4 Debian, Isc, Netapp and 1 more | 11 Debian Linux, Bind, Data Ontap Edge and 8 more | 2020-08-17 | 5.0 MEDIUM | 7.5 HIGH |
| named in ISC BIND 9.x before 9.9.9-P4, 9.10.x before 9.10.4-P4, and 9.11.x before 9.11.0-P1 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a DNAME record in the answer section of a response to a recursive query, related to db.c and resolver.c. | |||||
| CVE-2020-8574 | 1 Netapp | 1 Active Iq Unified Manager | 2020-08-12 | 4.6 MEDIUM | 7.8 HIGH |
| Active IQ Unified Manager for Linux versions prior to 9.6 ship with the Java Management Extension Remote Method Invocation (JMX RMI) service enabled allowing unauthorized code execution to local users. | |||||
| CVE-2020-8575 | 1 Netapp | 1 Active Iq Unified Manager | 2020-08-09 | 2.1 LOW | 4.4 MEDIUM |
| Active IQ Unified Manager for VMware vSphere and Windows versions prior to 9.5 are susceptible to a vulnerability which allows administrative users to cause Denial of Service (DoS). | |||||
| CVE-2020-8573 | 1 Netapp | 2 Hci H610s, Hci H610s Firmware | 2020-07-17 | 4.0 MEDIUM | 6.5 MEDIUM |
| The NetApp HCI H610C, H615C and H610S Baseboard Management Controllers (BMC) are shipped with a documented default account and password that should be changed during the initial node setup. During upgrades to Element 11.8 and 12.0 or the Compute Firmware Bundle 12.2.92 the BMC account password on the H610C, H615C and H610S platforms is reset to the default documented value which could allow remote attackers to cause a Denial of Service (DoS). | |||||
| CVE-2020-7456 | 2 Freebsd, Netapp | 2 Freebsd, Clustered Data Ontap | 2020-07-07 | 7.2 HIGH | 6.8 MEDIUM |
| In FreeBSD 12.1-STABLE before r361918, 12.1-RELEASE before p6, 11.4-STABLE before r361919, 11.3-RELEASE before p10, and 11.4-RC2 before p1, an invalid memory location may be used for HID items if the push/pop level is not restored within the processing of that HID item allowing an attacker with physical access to a USB port to be able to use a specially crafted USB device to gain kernel or user-space code execution. | |||||
| CVE-2015-7703 | 5 Debian, Netapp, Ntp and 2 more | 13 Debian Linux, Clustered Data Ontap, Data Ontap and 10 more | 2020-06-18 | 4.3 MEDIUM | 7.5 HIGH |
| The "pidfile" or "driftfile" directives in NTP ntpd 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77, when ntpd is configured to allow remote configuration, allows remote attackers with an IP address that is allowed to send configuration requests, and with knowledge of the remote configuration password to write to arbitrary files via the :config command. | |||||
| CVE-2015-7702 | 5 Debian, Netapp, Ntp and 2 more | 13 Debian Linux, Clustered Data Ontap, Data Ontap and 10 more | 2020-06-18 | 4.0 MEDIUM | 6.5 MEDIUM |
| The crypto_xmit function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (crash). NOTE: This vulnerability exists due to an incomplete fix for CVE-2014-9750. | |||||
| CVE-2015-7701 | 5 Debian, Netapp, Ntp and 2 more | 13 Debian Linux, Clustered Data Ontap, Data Ontap and 10 more | 2020-06-18 | 5.0 MEDIUM | 7.5 HIGH |
| Memory leak in the CRYPTO_ASSOC function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (memory consumption). | |||||